The LR6 is part of the new LR range of signal towers with diameters from 40 to 70mm. Compared to earlier models, the LR series gives higher visibility with up to two times the brightness plus a new non-directional buzzer alarm. Up to 5 colour modules are freely interchangeable.
NEW LR SERIES MODULAR SIGNAL TOWERS
LIGHT TOWERS WITH HIGHER BRIGHTNESS & SOUND LEVELS
Simple modular construction allows sequence changes by hand
New 360º non-directional buzzer with 4 alternative sounds
1 to 5 LED colours and 3 body colours
LR6 Signal Towers
THE LED LIGHT STACK
Up to two times as bright as previous models with colours red, amber, green, blue and white.
Lens modules give even visibility over 360º
Flashing or continuous lights
LED modules can be re-organised through a simple twist & lock method
NEW TECHNOLOGY FOR THE AUDIBLE ALARM BUZZER
The optional buzzer sits on top of the signal tower.
There are 4 selectable sounds : rapid intermittent, continuous, rapid hi-low and a sweep sound. The output of the LR series buzzers is 85-90dB at 1m and there is a selectable 10dB sound reduction.
The new design has a smooth external surface without openings and the sound output is non-directional through 360º.
The fully enclosed design is rated at IP65.
THE LR FAMILY OF SIGNAL TOWERS
The LR range includes 4 sizes with diameters 40mm (LR4), 50mm (LR5), 60mm (LR6) and 70mm (LR7).
Plug-together modularity extends throughout the range. Buzzers can be added to the top of the towers.
Full and clear information is given in the 20 page catalogue.
MATERIALS FOR THE NEW LR LIGHT TOWERS
Smooth surfaces without dirt traps allow easy cleaning. Upgraded body and buzzer units are polycarbonate for improved shoch resistance. Colours are off-white, silver and black. O-rings between the modules are silicon
WIDE RANGE OF MOUNTING OPTIONS FOR LR SIGNAL TOWERS
In summary, options are direct, with a foot bracket or a pole. There are foot brackets for mounting to a flat surface, L-shaped brackets for wall mounting and poles from 100 to 1000mm to raise the level of the tower.
A new option is a folding bracket that locks in 2 positions 90º apart.
OTHER SPECIFICATIONS FOR LR SERIES SIGNAL TOWERS
Supply DC 24V or AC100-240V. Current consumption 1 to 9W depending on the number of modules.